ORIGINAL MODEL HUAWEI OEGD01N01 SFP-1000BASE-T-RJ45-100MTS WITH NOTE

KIT WITH 2 SFP 1000M COOPER RJ45 1000M Gigabit only ACCEPT 100MB CONNECTION

COMPATIBLE WITH CISCO/ MIKROTIK/ ​​UBNT/ FIBERHOME/HUAWEI/TPLINK/DLINK/DELL/DIGISTAR ETC

OM9150X1A 1000MBPS

Characteristics:
up to 1.25 Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (0°C to +85°C)
all-metal enclosure down EMI
low power dissipation
Compact RJ-45 connector assembly
detailed product information in EEPROM
3.3V single power supply
Access to physical layer IC via 2 serial bus wires
Compatible with SFP MSA
Compatible with IEEE 802.3TM -2002
Complies with FCC 47 CFR Part 15, Class B
RoHS compliance products

Applications:
1.25 Gigabit Ethernet over Cat 6 cable
switch/router to Switch/Router Link
high speed I/O for file severs

Description:
RJ45 1000Mbs SFP copper transceiver is high performance, module of
low cost compatible with Gigabit Ethernet and 1000BASE-T standards,
as specified in IEEE and IEEE 802.3ab 802.3-2.002 , which I support
1000Mbps data rate up to 100 meters to reach more than category of
unshielded twisted pair 5 cable. The FT3401G supports1000 Mbps
full duplex data links with 5 levels of pulse amplitude signals
Modulation (PAM). All four pairs of cable are used with rate
Mbps symbol rate on each pair. The OP3401G provides information
standard serial ID compatible with SFP MSA, which can be accessed
with the address of A0h through the serial CMOS protocol EEPROM of
2 wires. The physical IC can also be accessed via 2 wires of
serial bus at address ACh