Cisco Aironet 1815w Series  AIR-AP1815W-E-K9
Model:     Cisco Aironet 1815W 802.11ac Wave 2 Access Point
Detail:     Cisco Aironet 1815w Series, Reg Domain E

Product Details
MU-MIMO
   
Multiuser (MU) multiple-input multiple-output (MU-MIMO) allows simultaneous data transmission to multiple 802.11ac Wave 2–capable clients to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time. This was typically referred to as single-user MIMO (SU-MIMO).

Gigabit Ethernet ports
   
Three local Gigabit Ethernet ports are available to securely connect wired devices to the network. Traffic from wired devices can be tunneled back to a wireless LAN controller (for compatible controllers) or be locally switched by the access point. One of these Ethernet ports can also provide Power over Ethernet (PoE) out to power a device such as an IP phone or a security camera.

Cisco Mobility Express solution
   
Flexible deployment through the Cisco Mobility Express solution is ideal for small to medium-sized deployments that require 50 or fewer access points. Easy setup allows the 1815w to be deployed on networks without a physical controller.

Cisco Aironet 1815w Access Point Specification

Authentication and security
    

●  Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)

●  802.1X, RADIUS authentication, authorization and accounting (AAA)

●  802.11r

●  802.11i

Software
    

●  Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4 or later

●  Cisco Mobility Express

Supported WLAN COntrollers
    

●  Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers,

●  Cisco Mobility Express

Maximum clients
    

●  Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point

802.11ac
    

●  2x2 single-user/multiuser MIMO with two spatial streams

●  Maximal ratio combining (MRC)

●  20-, 40-, and 80-MHz channels

●  PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)

●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)

●  802.11 Dynamic Frequency Selection (DFS)

●  Cyclic shift diversity (CSD) support

Ethernet ports
    

●  Authentication with 802.1X or MAC filtered

●  Dynamic VLAN or per port

●  Traffic locally switched or tunneled back to wireless LAN controller

Bluetooth (future Availability)
    

●  Integrated Bluetooth 4.1 (including BLE) radio

●  Maximum transmit power: 4 dBm

●  Antenna gain: 2 dBi

Integrated antennas
    

●  2.4 GHz, gain 2 dBi

●  5 GHz, gain 3 dBi

Interfaces
    

●  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)

●  Management console port (4-pin connector)

●  Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:

◦   PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af

●  One passive pass-through port RJ-45 (back to bottom)

Indicators
    

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions
(W x L x H)   

●  Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)

Weight   

●  Access point without mounting bracket or any other accessories: 10 oz (280 g)

Environmental
    

●  Operating

◦   Temperature: 32° to 104°F (0° to 40°C)

◦   Humidity: 10% to 90% (non-condensing)

◦   Max. altitude: 9843 ft (3,000 m) @ 40°C

●  Non-operating (storage and transportation)

◦   Temperature: -22° to 158°F (-30° to 70°C)

◦   Humidity: 10% to 90% (non-condensing)

◦   Max. altitude: 15,000 ft (4,500 m) @ 25°C

System
    

●  1 GB DRAM

●  256 MB flash

●  710 MHz quad-core

Powering options
   
●  802.3af/at Ethernet switch

●  Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)

Power draw
    

●  8.5W (maximum, without PoE out)

Physical security
    

●  Torx security screw, included with the access point

●  Kensington lock slot to lock device to mounting bracket.

Mounting
    

●  Included with the access point: mounting bracket AIR-AP-BRACKET-W3

Accessories
   
●  Mounting bracket: AIR-AP-BRACKET-W3= (available as spare)

●  Spacer kit: AIR-AP1815W-KIT= (sold separately), includes spacer and RJ-45 jumper cable

●  Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 20 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports


Compliance
    

●  Safety:

◦   UL 60950-1

◦   CAN/CSA-C22.2 No. 60950-1

◦   UL 2043

◦   IEC 60950-1

◦   EN 60950-1

●  Radio approvals:

◦   FCC Part 15.247, 15.407

◦   RSS-247 (Canada)

◦   EN 300.328, EN 301.893 (Europe)

◦   ARIB-STD 66 (Japan)

◦   ARIB-STD T71 (Japan)

◦   EMI and susceptibility (Class B)

◦   FCC Part 15.107 and 15.109

◦   ICES-003 (Canada)

◦   VCCI (Japan)

◦   EN 301.489-1 and -17 (Europe)

◦   EN 50385

●  IEEE standards:

◦   IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d

◦   IEEE 802.11ac

●  Security:

◦   802.11i, WPA2, WPA

◦   802.1X

◦   AES

●  Extensible Authentication Protocol (EAP) types:

◦   EAP-Transport Layer Security (TLS)

◦   EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)

◦   Protected EAP (PEAP) v0 or EAP-MSCHAPv2

◦   EAP-Flexible Authentication via Secure Tunneling (FAST)

◦   PEAP v1 or EAP-Generic Token Card (GTC)

◦   EAP-Subscriber Identity Module (SIM)

●  Multimedia:

◦   Wi-Fi Multimedia (WMM)

●  Other:

◦   FCC Bulletin OET-65C

◦   RSS-102