Product description
Cisco 881 Eth Sec Router with 802.11n ETSI Compliant
Dimensions & Weight
Depth:     26.4 cm
Height:     4.4 cm
Weight:     2.5 kg
Width:     32.5 cm
Environmental parameters
Humidity Range Operating:     10 - 85% (non-condensing)
Max Operating Temperature:     40 ° C
Min Operating Temperature:     0 ° C
Expansion / Connectivity
Interfaces:     LAN: 4 x 10Base-T / 100Base-TX - RJ-45 ¦ WAN: 1 x 10Base-T / 100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ USB: 1 x 4 pin USB type A.
general
Authentication Method:     RADIUS, TACACS +
Capacity:     IPSec VPN tunnels: 20
Compliant standards:     IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.1ag, IEEE 802.11n (draft 2.0), ETSI, VCCI-II , EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS / NZ 3548 Class B, AS / NZS 60950-1, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:     Wireless, wired
Data Link Protocol:     Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:     Wireless router - 4-port switch (integrated)
Enclosure Type:     Desktop
Encryption Algorithm:     LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:     NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI / MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM ) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, bidirectional forwarding detection (BFD), security lock slot (cable lock sold separately)
Flash memory:     128 MB
Frequency band:     2.4 GHz
Network / Transport Protocol:     L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
R.A.M:     512 MB (installed) / 1024 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:     Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:     OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR), WCCP
Status Indicators:     Port status, power
power
Power Device:     External power adapter - 60 watts
Voltage Required:     AC 120/230 V (50/60 Hz)
Software / system requirements
OS Provided:     Cisco IOS Advanced IP services