Cisco, 880 Series, Integrated Services Routers, C888-K9

Model:     C888-K9 Cisco Router 880 Series
Detail:     Cisco 880 Series Integrated Services Routers

Model    C888-K9

Use Case

Typical deployment    Small branch, retail, or managed CPE

Typical number of users    1 executive up to 20 employees

Performance positioning    Up to 15 Mbps

WAN
Ethernet    -

VDSL2/ADSL2+    -

SHDSL    Multimode EFM/ATM SHDSL

Fiber    -

3G/4G LTE    3.7 HSPA+

Serial    -

LAN

Ports    4

802.11 wireless    2.4 GHz 802.11n integrated antenna

Voice    -

PoE    2-port integrated PoE

Software Features

Routing protocols    RIPv1, v2, BGP, OSPF, EIGRP

IPv6    Yes

Advanced IP services    Upgradeable

Video/medianet    Ready

Security
VPN support    GETVPN, DMVPN with license

ScanSafe    Ready

IPsec tunnels    20

SSL VPN    With license

Content filtering    With license

Application Experience

Integrated WAN optimization - Cisco WAAS Express
    

1.5 Mbps optimized; 30-75 TCP connections; with license

Application Visibility and Control (AVC)    No

IOS high-availability features    Yes

Physical Attributes

Maximum dimensions    1.9 x 12.8 x 10.4 in

Maximum weight    5.5 lb (2.5 kg)

Fanless    Yes

Optional hardened form factor    No

C888-K9 Specification
General
Device Type     Router - 4-port switch (integrated)
Enclosure Type     Desktop
Connectivity Technology     Wired
Data Link Protocol     Ethernet, Fast Ethernet
Capacity     Wireless VLANs: 8 ¦ IPSec VPN tunnels: 20 ¦ Maximum number of configured SSIDs: 16
Network / Transport Protocol     L2TP, IPSec, FTP, DNS
Routing Protocol     RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Remote Management Protocol     Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Encryption Algorithm     LEAP, DES, Triple DES, SSL, TLS, PEAP, TTLS, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP
Authentication Method     RADIUS, Radio Service Set ID (SSID), TACACS+, EAP-FAST
Features     Firewall protection, NAT support, MDI/MDI-X switch, VPN support, VLAN support, MAC address filtering, Broadcast Storm Control, Intrusion Prevention System (IPS), Multicast Storm Control, Unicast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy, DHCP relay, Port Security, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Management Information Base (MIB), Class of Service (CoS), Call Admission Control (CAC), DiffServ Code Point (DSCP) support
Compliant Standards     IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.11i, Wi-Fi CERTIFIED, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, CISPR 22, EN50082-1, EN55022 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, AS/NZS 3548 Class B, VCCI V-3, ICES-003 issue 4 Class A, KN22, EN 300386, EN55024:1998 + A1 + A2, IEC 61000-6-1:2005, EN 300 386 V1.3.3
RAM     256 MB
Flash Memory     128 MB
Status Indicators     Port status, power
Communications
Type     DSL modem
Protocols & Specifications     ITU G.991.2 (G.shdsl)
Expansion / Connectivity
Interfaces     LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45
Power
Power Device     External power adapter - 60 Watt
Voltage Required     AC 120/230 V (50/60 Hz)
Dimensions & Weight
Width     12.8 in
Depth     9.8 in
Height     1.7 in
Weight     5.51 lbs
Environmental Parameters
Min Operating Temperature     32 °F
Max Operating Temperature     104 °F
Humidity Range Operating     10 - 85% (non-condensing)